RafterDeTTails are available in sizes to match conventional solid sawn timbers.
|
Nominal |
Actual |
Nominal |
Actual |
|
| 4x6 | 3.5" x 5.5" | 6x6 | 5.5" x 5.5" | |
| 4x8 | 3.5" x 7.25" | 6x8 | 5.5" x 7.25" | |
| 4x10 | 3.5" x 9.25" | 6x10 | 5.5" x 9.25" | |
| 4x12 | 3.5" x 11.25" | 6x12 | 5.5" x 11.25" |
* Dimensional tolerances are +/- 1/8" in width, height, or length.
RafterDeTTails have a standard 6" solid wood end. This permits the shaping of almost any profile.
The solid wood end for 12" (or shorter tails) is 4".
A custom "plug" (solid wood end) can be cut for special profiles.